Product Categories

Schlee (China) Refrigerating Equipment Manufacturing Co.,Ltd

Add:Jupu Road, Pukou Development Zone, Nanjing City, Jiangsu Province, China

Contact us:Annie

Tel:+86-25-66615565

Fax:+86-25-84485651

Mob:+86-18013811852

E-mail:world@chinaschlee.com

Web Site:www.schleechiller.com

Home > News > Content
Air Cooled Screw Chiller Features
- Sep 04, 2017 -

Air-cooled screw chiller because of its key components - the compressor used screw-type air-cooled screw chiller, the unit from the evaporator out of the state of the gas refrigerant; compressed by the compressor after compression, into a high temperature and high pressure state. Compressed gas refrigerant, in the condenser, isostatic cooling condensation, after condensation into liquid refrigerant, and then through the throttle valve to low pressure, into a gas-liquid mixture. Which low temperature and low pressure liquid refrigerant, in the evaporator to absorb the heat of cold matter, re-become a gaseous refrigerant. The gaseous refrigerant is reintroduced into the compressor via piping to start a new cycle. This is the four cycles of the refrigeration cycle. It is also the main working principle of the screw chiller.

Features

1, the compressor using international brands, the new high-efficiency screw rotor compressor, compressor performance than the average 20% -30% higher, and access to European and American multi-national patent IS9001 international quality certification.

2, high efficiency 5: 6 patent asymmetric rotor tooth profile.

3, capacity control can be used four (100% -75% -50% -25%) or three (100% -66% -33%) and non-segmented control system.

4, the use of 11 bearings and a axial thrust balance drum combination design, a substantial increase in bearing life 2.5-3.5 times.

5, the use of high efficiency silicon steel special slot design, and equipped with internal and external design of the cooling channel, so that the compressor motor can play under any load the highest efficiency.

6, a unique built-in hydraulic system, no oil pump to ensure that the compressor to maintain the best lubrication effect Oil separator with double filter, filter effect is good, heat exchanger can play the maximum capacity.

7, high efficiency, low noise, low vibration.

8, a variety of refrigerants to choose from, in addition to R22 refrigerant, you can also use R134a, R407c and other environmentally friendly refrigerant.

9, the full range of compressor capacity ratio (VI = 2.2 / 2.6 / 3.0 / 3.5) can be effectively avoided due to over-compression or compression caused by the additional energy consumption.

Air-cooled screw chillers do not need to be equipped with cooling water pumps, cooling towers and other auxiliary equipment, can save a lot of material and engineering installation costs, or even need to set the engine room.

Units can be widely used in hotels, restaurants, shopping malls, schools, hospitals, offices and other industrial and civil construction environment air conditioning system.

In addition to stereotypes products, the company can also be customized according to customer requirements of various types of special chillers and heat pump units, and provide on-site assembly, technical guidance and on-site commissioning services.

Air-cooled screw chiller for the fin-type, the use of dual-oil ripple hydrophilic aluminum platinum, made by a professional heat exchanger processing equipment, with a compact, small size, light weight, high efficiency heat transfer, and Configuration of low-speed large-axis axial fan, can effectively reduce the running noise, reduce the impact on the surrounding environment.

Air-cooled screw chiller unit control system using imported PLC program controller, man-machine interface configuration large screen touch screen, the interface is simple and generous, intuitive and easy operation.

Air-cooled screw chillers have reliable safety protection devices, including: high and low voltage protection, exhaust overheating protection, compressor motor overheating protection, overload current protection, antifreeze temperature protection, water protection, emergency stop Switch, temperature-type easy to fuse, such as safety valve.